Sale!
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 2
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 3
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 4
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 5
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 6
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 7
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 8
TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports - Image 9

TP-Link 8-Port 10/100Mbps PoE+ Switch with 4 PoE+ Ports

Original price was: R839.00.Current price is: R730.00. Incl. VAT

  • 8 × 10/100Mbps RJ45 ports, including 4 × PoE+ ports
  • IEEE 802.3af/at support with up to 30W available per PoE port
  • 66W total PoE power budget for connected powered devices
  • Extend Mode supports PoE data and power transmission up to 250m under suitable conditions
  • PoE Auto Recovery can automatically reboot dropped or unresponsive PoE devices
  • Fast Ethernet ports are limited to 100Mbps; choose a Gigabit switch where higher wired speeds are required
SKU: MI-TP-SF1008P Categories: , , Brand:

Description

TP-Link TL-SF1008P PoE+ Switch for Simple 4-Device PoE Installations | 66W PoE Budget

The TP-Link TL-SF1008P combines eight Fast Ethernet network ports with four PoE+ outputs, allowing compatible devices to receive network data and electrical power through the same Ethernet cable.

It is particularly useful for smaller IP surveillance, access point and IP phone installations where four powered ports are enough and Gigabit network speed is not required.

Is This Right for You?

  • Suitable when you need to power up to four compatible PoE devices from one network switch.
  • A practical choice for smaller CCTV, Wi-Fi access point and VoIP installations using Fast Ethernet connections.
  • Consider a Gigabit PoE switch instead if connected equipment or network traffic requires speeds above 100Mbps.

Why Choose This Product?

  • Power and data through one cable: Four PoE+ ports simplify installations by carrying Ethernet data and power to compatible devices over the same network cable.
  • Useful PoE capacity: IEEE 802.3af/at support provides up to 30W per PoE port, within the switch’s 66W total PoE budget.
  • Longer surveillance cable runs: Extend Mode can increase PoE transmission distance to as much as 250m where installation conditions allow.
  • Automatic device recovery: PoE Auto Recovery can reboot an unresponsive powered device without requiring someone to manually disconnect its power.
  • Prioritised critical connections: Priority Mode gives ports 1 and 2 higher priority for applications where maintaining service is especially important.
  • Quiet operation: The fanless design avoids fan noise and the switch requires no software configuration for normal operation.

Before You Buy

  • The four powered ports are ports 1 to 4 and are intended for IEEE 802.3af/at compatible powered devices.
  • The 66W figure is the total PoE budget across the PoE ports; each individual PoE port supports up to 30W.
  • All eight network ports are 10/100Mbps Fast Ethernet ports rather than Gigabit Ethernet.
  • When Extend Mode is used, the applicable port speed is reduced to 10Mbps. Actual achievable distance varies with cable quality, cable type and connected-device power requirements.
  • An external power adapter is required and is included with the switch.

Technical Specifications

BrandTP-Link
ModelTL-SF1008P
Switch TypeUnmanaged PoE+ switch
Network Ports8 × 10/100Mbps RJ45
PoE Ports4 × PoE+ ports, ports 1–4
PoE StandardsIEEE 802.3af, IEEE 802.3at
Maximum PoE Power per Port30W
Total PoE Power Budget66W
Switching Capacity1.6Gbps
MAC Address Table2K
Forwarding MethodStore-and-forward
Extend ModeYes, up to 250m under suitable conditions
Priority ModeYes
PoE Auto RecoveryYes
FanFanless
Power Adapter Output53.5V DC / 1.31A
Dimensions171 × 98 × 27mm

What’s in the Box

  • 1 × TP-Link TL-SF1008P PoE+ Switch
  • 1 × Power Adapter
  • 1 × Installation Guide
  • Rubber Feet

Additional information

Dimensions171 × 98 × 27 mm

This product is generally shipped directly from the warehouse and may not be physically stocked at our admin / dispatch office. Delivery is typically within 1 to 3 working days with outlying areas possibly requiring an additional 1 to 2 working days. Collection from our dispatch office is possible by prior arrangement.

While stock availability is updated daily, warehouse sales are not always reflected in real time. In the unlikely event that an item is out of stock, we will notify you promptly and advise you of the revised lead time or any suitable alternatives.

Related products