Description

RoboGuard Alarm Interface

Integrate RoboGuard into an existing alarm system

The RoboGuard Alarm Interface is a fixed interface unit designed to connect RoboGuard wireless outdoor detectors to an existing alarm panel. It can supervise and monitor up to four RoboGuards and provides individual indication for intruder detection, tamper and status conditions, making it a practical solution for sites that need early warning from outdoor beams while still using a conventional alarm system.

Designed for clear status indication and easier fault finding

The unit uses dedicated LEDs to show the condition of each programmed guard. Each zone can be switched on or off individually, while tamper and status monitoring remain active even if a zone is disabled. The manual also notes an automatic supervision routine, where RoboGuard devices send an auto-test signal every 20 minutes. If a unit fails to report in, the Alarm Interface indicates a possible communication or battery issue through the status LED.

Flexible relay outputs for panel integration

The Alarm Interface includes six relay switches, with normally open and normally closed options, allowing it to be integrated with a wide range of alarm panels and related devices. It is powered from 12 V DC and is intended to be mounted close to the alarm panel and as high as possible for good RF range.

A practical option for expanding a RoboGuard installation

RoboGuard’s product page describes the Alarm Interface as a 4-zone, 4-output fixed base station used to interface RoboGuards into an existing alarm panel, and notes that it is also suitable for larger installations that require more than 8 guards.

Key Features

• Interfaces RoboGuard detectors into an existing alarm panel.
• Supervises up to 4 RoboGuards.
• Individual intruder, tamper and status indication per programmed guard.
• 6 relay switches with N/O and N/C configuration.
• Individual zone on/off control.
• Automatic status supervision with auto-test reporting.
• Designed for fixed installation near the alarm panel.
• Useful for integrating outdoor early warning detection into a conventional alarm system.

Technical Specifications

• Product type: Fixed RoboGuard alarm interface / base station.
• Supported devices: Up to 4 RoboGuards.
• Relay outputs: 6 relay switches.
• Relay contact options: N/O and N/C.
• Power supply required: +12 V DC.
• Current consumption: 10 mA.
• Dimensions: 170 × 95 × 29 mm.
• Weight: 180 g.

Applications

• Integrating RoboGuard outdoor detectors with a conventional alarm panel.
• Adding outdoor early warning zones to residential or commercial alarm systems.
• Expanding larger RoboGuard installations where a fixed panel interface is preferred.

What’s in the Box

• RoboGuard Alarm Interface unit.

Excludes 12V DC Power Supply (sold separately)

Power Supply Options

RoboGuard 220V Plug-In Charger

RoboGuard Power Pack 7Ah with Siren Output and HQ Interface